 76 x 76 x 36mm |
Uniplex Single beam counter with 4 digit 12mm high LED display for viewing the recorded data. This model will count a person every time that person crosses the beam regardless of the direction of approach. The system is supplied complete with: Suitable Mains adaptor, Reflector and 2 Magnetic activators. |
|
| Special Features | Supplied Accessories | ||||||||
| LED Display To allow the counter unit to blend in with its surroundings and to discourage unwanted interference with the system, the digits of the integral display are not visible until they are activated with one of the supplied magnetic activators. Reset For maximum security the user can inhibit the reset feature. With the reset feature enabled, the display is cleared by holding one of the supplied magnets against the the front cover of the counter for 3 seconds. Leg/Body Counting The counter can be set to either record individual legs or whole bodies thereby increasing the choice of locations. The on-board processor automatically carries out the necessary calculations to obtain the correct number of people that have passed through the system. Divide by 2 The divide by 2 option allows the user to set the counter to automatically halve the recorded counts. A useful feature for locations where entry points can also be used for exiting. Data Protection The recorded data is stored on non-volatile memories and is therefore fully protected against power failure or accidental removal of the power supply without the need for back-up batteries. |
 UK 3 pin European 2 pin North American 2 pin  85mm Diameter  Magnet (2 supplied) Optional Extras  Keyfob |
||||||||
Back up
|
|||||||||
|
Material Copyright © 2007 Axiomatic Technology Ltd |
|||||||||